User's Manual

CHAPTER3
UsingTerminalCommands
37
REMOTE No.
EXAMPLE # GSMPUK
42914 GSMPUK Ready 0
#
# GSMPUK 56789 1234
42914 GSMPUK 0
#
GSMSQ
D
ESCRIPTION Returns the signal quality and the bit error rate of the used cellular
network.
PARAMETERS None.
REMARKS GET only. The command works only if no GPRS connection has been
established. If a GPRS connection has been established, use GSMSTAT
instead.
RETURNS The signal quality parameter.
REMOTE No.
EXAMPLE # GSMSQ
42914 GSMSQ 31 99 0
#
GSMSTAT
D
ESCRIPTION Displays the status of the GSM module.
PARAMETERS None.
REMARKS GET only.
RETURNS A list of various status information of the current module state.
REMOTE Yes.
EXAMPLE # gsmstat
42914 gsmstat
Power supply on: yes
DTR on: yes
DCD on: no
RI on: no
RTS on: yes
CTS on: no
Modem on: yes
Modem present: yes
Modem initialized: yes
SIM card present: yes
PIN required: yes