User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Using the addWAVE
- Chapter 3. Performing Advanced Functions
- Appendix. Specifications
- Index
CHAPTER3
UsingTerminalCommands
42
EXAMPLE # TIME 20/06/2009 12:10:10
42914 TIME 0
#
# TIME
42914 TIME 20/06/2009 12:10:10 0
#
TX
NOT AVAILABLE FOR GSM/GPRS-only RTUs
DESCRIPTION Switches the unit to transmit mode (for tuning purposes).
PARAMETERS • None (sends an unmodulated carrier)
• 1 (sends a 1 kHz modulated carrier)
• 0 (sends a 2 kHz modulated carrier)
• 5 (sends a mixed 1 + 2 kHz modulated carrier)
REMARKS The system stops, and exits the command only when a key is pressed.
This command returns no message.
RETURNS Nothing.
REMOTE No.
EXAMPLE # TX
442 TX 0
#
# TX 1
442 TX 0
#
# TX 5
442 TX 0
#
TYPE
D
ESCRIPTION Requests the hardware type information of the device.
PARAMETERS None.
REMARKS GET only.
RETURNS The hardware type.
REMOTE Yes.
EXAMPLE # TYPE
42914 TYPE A753 0
#