User's Manual

CHAPTER3
UsingTerminalCommands
43
VER
D
ESCRIPTION Requests the firmware version of the device.
PARAMETERS None.
REMARKS GET only.
RETURNS The current version.
REMOTE Yes.
EXAMPLE # VER
42914 VER 1.3.2 0
#
VERB
D
ESCRIPTION Sets the verbosity level of the device. This command is used for
debugging only.
 WARNING The device will consume a lot more power when the verbosity level is
greater than 0. This could discharge your battery and/or prevent
proper operation.
PARAMETERS A verbosity level (0...255).
REMARKS SET only.
RETURNS Error code.
REMOTE No.
EXAMPLE VERB 1 # tx: 'AT'
rx: 'OK'
tx: 'ATE0Q0V1&K3&C1&D2'
rx: 'OK'
tx: 'AT+CMEE=1'
rx: 'OK'
tx: 'AT+CRC=1'
XDATA
D
ESCRIPTION This command requests data for a list of logical channels for given
timestamps.
PARAMETERS XDATA requires a lot of parameters for specifying what to retrieve.
Please consult the A740 User Manual for detailed explanation of this
command. The output of the command is not intended to be human
readable.
REMARKS GET only. (This is a data retrieval command, local as well as remote.)
RETURNS A data block.