User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Using the addWAVE
- Chapter 3. Performing Advanced Functions
- Appendix. Specifications
- Index
5
Chapter 1.Introduction
This manual explains the hardware aspects of Adcon’s A753 addWAVE
GSM/GPRS Series 4 remote telemetry units, including installation
issues and certain parameter configurations. The manual is divided as
follows:
• Introduction, which gives some general information and
document conventions.
• Using the addWAVE, which details the installation and use of the
remote telemetry unit.
• Performing Advanced Functions, which discusses connectors and
controllers and provides other information for advanced users.
• Specifications, which describes operating parameters for the
devices.
AbouttheA753addWAVEGSM/GPRSSeries4
The A753 addWAVE GSM/GPRS Series 4 remote telemetry unit (RTU)
is a low-power, GSM/GPRS-based telemetry device with four digital
I/O ports, twelve analog inputs, and four counter inputs.
The A753 incorporates a GSM module and uses the standard GSM
network for retrieving telemetry data (900/1800 MHz in Europe, 850/
1900 MHz in the US).
The A753 is a ruggedized RTU, complying with the IP65 ingress
protection class (NEMA 4). Depending on topography, it ensures a
reliable wireless connection to your cellular service provider. Your
provider’s cellular network must cover the site where you want to