User's Manual

CHAPTER3
Usingterminalcommands
47
DESCRIPTION Switches the unit to transmit mode (for tuning purposes).
PARAMETERS • None (sends an unmodulated carrier)
• 1 (sends a 1 kHz modulated carrier)
• 0 (sends a 2 kHz modulated carrier)
• 5 (sends a mixed 1 + 2 kHz modulated carrier)
REMARKS The system stops, and exits the command only when a key is pressed.
This command returns no message.
RETURNS Nothing.
REMOTE No.
EXAMPLE # TX
442 TX 0
#
# TX 1
442 TX 0
#
# TX 5
442 TX 0
#
TYPE
A
VAILABLE FOR RA440
A440
DESCRIPTION Requests the hardware type information of the device.
PARAMETERS None.
REMARKS GET only.
RETURNS The hardware type.
REMOTE Yes.
EXAMPLE # TYPE
441 TYPE RA440 0
#
VER
A
VAILABLE FOR RA440
A440
DESCRIPTION Requests the firmware version of the device.
PARAMETERS None.
REMARKS GET only.