User Manual

#0460 Tow Hitch

Installation and Set-Up Instructions

Otter II Towing Hitch

Fits X-Large Sled

Parts Identification Checklist

Side Tube

(Qty 2)

Hitch Coupler

(Qty

U-Shaped Sled Bracket,

(For Old Style Sled Only)

(Qty

5/16 Washer

(Qty 16)

5/16 x 3

Hex

Bolt

(Qty

Hitch Pin with Spring Clip

(Qty 2)

5/16

Nylon

Hex

Lock Nut

(Qty

5/16 x 1

Hex

Bolt

(Qty

New Text

Instructions - 70779

PAGE 1
#0460 Tow Hitch New Text Installation and Set-Up Instructions Otter II Towing Hitch Fits X-Large Sled Parts Identification Checklist 1 Side Tube (Qty 2) 4 Hitch Pin with Spring Clip (Qty 2) Hitch Coupler 2 (Qty 1) 5 5/16 x 1 Hex Bolt (Qty 6) 6 5/16 x 3 Hex Bolt (Qty 2) 3 U-Shaped Sled Bracket, (For Old Style Sled Only) (Qty 1) 7 5/16 Washer (Qty 16) 8 5/16 Nylon Hex Lock Nut (Qty 8) Instructions - 70779
PAGE 2
Tools Required: Towing Hitch Instructions for the Following Sled: 1/2 Box End Wrenc 1/2 Socket and Rachet Drill 3/8 bit Straight Edge & Marker Adjustable Crescent Wrench Otter II X-Large Sled Installation for Sleds: 1. 2. 3. 4. Layout all parts. Turn the sled upside down. With a straight edge, mark a line towards the front of sled 2 inches above the sled lip on both sides. Line up the U-Shaped sled bracket (Item 3) on the line marked as shown below.
PAGE 3
Installation Continued: 7. Lay side tubes (Item 1) on ground to form an “A” shape. 8. Attach side tubes (Item 1) to hitch coupler (Item 2) with 5/16 x 3 hex bolts (Item 6), washers (Item 7), and lock nuts (Item 8). 9. Assemble towing hitch assembly to U-Shaped Sled Bracket (Item 3) with hitch pins (Item 4) and secure hitch pins with spring clips. X-Large Sled (Sold Separately) 1 6 3 4 8 7 2 Towing Hitch January, 2008 Otter Outdoors Inc. 411 W Congress St.