User Manual

2 in.

Tools Required: Towing Hitch Instructions for the Following Sled:

1/2 Box End Wrenc

1/2 Socket and Rachet Otter II X-Large Sled

Drill

3/8 bit

Straight Edge & Marker

Adjustable Crescent Wrench

Installation for Sleds:

1. Layout all parts.

2. Turn the sled upside down.

3. With a straight edge, mark a line towards the front of sled 2 inches above the sled lip on both sides.

4. Line up the U-Shaped sled bracket (Item 3) on the line marked as shown below. Bracket should be tight against the

front of the sled.

5. Mark all 6 holes and remove the bracket, then drill with the 3/8 bit.

6. Attach the U-Shaped sled bracket (Item 3) with the fasteners shown.