Safety Instructions

CONGRATULATIONS!
Yo
u’ve purchased the finest in natural lighting technology with your new OttLite
®
p
roduct.
PR
ODUCT REGISTRATION FORM
Ple
ase complete the enclosed Product Registration Form and return it today by mail, or
register online by going to: OttLite.com/warranty
WA
RNING: To prevent electric shock, make sure the lamp is not plugged in until
all steps are complete.
NOTE: THIS UNIT IS FULLY ASSEMBLED
1.
Re
move from packing, placing product flat on a steady surface.
2.
Connect power adapter input (A) into connector (B) in the rear-bottom of the
speaker base.
3. Pl
ug the power adapter (C) into a standard household 120V AC outlet.
Note: Only use with the supplied power adapter to avoid damage or fire.
4.
To t
urn on lamp tap
on t
op of shade.
5.
To a
djust brightness, tap
ag
ain. The lamp has three levels of brightness.
6.
To c
hange color temprature of the light, touch and hold
. Th
e lamp has three
color modes.
7.
By h
olding the fabric covered base you can lift the lamp shade off and use it as
a battery powered light.
Note: The lamp is battery powered and needs to be charged on the speaker
base. The lamp has an indicator that illuminates when the lamp is charging.
Bluetooth
®
Sp
eaker Operation
1.
To
turn on the Bluetooth
®
sp
eaker, press and hold
un
til blue light starts
flashing.
2.
On yo
ur device, open the Bluetooth
®
ap
p or Bluetooth
®
se
ttings. Locate and select
the device “PL-0246” to pair the speaker to your device. A solid blue light indicates
the speaker is connected. A flashing light indicates it is not connected.
3.
Volume up/down, play/pause, and skip forward/backward can be controlled
from either your device or the speaker itself.
4.
To s
kip to forward, press and hold the volume up (
+
) bu
tton. To skip backward,
press and hold the volume down (
-
) bu
tton.
5.
To
turn off the Bluetooth
®
sp
eaker, press and hold
un
til the blue light
starts flashing and the Bluetooth
®
sp
eaker will turn off.
Note: The speaker must be plugged into a household outlet to play music
and/or to recharge the lamp.
SA
FETY WARNING:
TO R
EDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
1.
Ne
ver use with an extension cord unless the plug can be fully inserted into the
receptacles in the extension cord.
2.
Do n
ot alter the plug.
3
.
Th
e lamp head included with this unit cannot be replaced by the consumer.
4.
IN
DOOR USE ONLY.
NOTE: The important safety instructions appearing in this instruction sheet are
not meant to cover all possible conditions and situations that may occur. It must
be understood that common sense, caution, and care must be used with any
electrical product
.
CAU
TION!
IF T
HE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS
DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE
AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY.
CAU
TION!
TH
E LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN
THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
CAU
TION: Any change or modification to product not expressly recognized by
OttLite Technologies voids OttLite’s responsibility for proper function of product.
FCC PART 15
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAN ICES-005 (B)/NMB-005 (B)
POWER ADAPTER SPECIFICATION:
Input: AC 100-240V, 50/60 Hz, 0.6A
Output: 5V DC, 2.0A with a Male DC Plug
Output power: 3W (lamp) + 3W (speaker)
Speaker: 1.5 inch (40mm), 4 ohms
Bluetooth
®
The Bluetooth
®
word mark and logos are registered trademarks owned by the
Bl
uetooth SIG, Inc. and any use of such marks by OttLite
®
is u
nder license.
IC
WARNING
Th
is device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of
RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes:
(1) Cet dispositif ne peut causer des interférences; et
(2) Cet appareil doit accepter toute interférence, y compris les interférences qui
peuvent causer un mauvais fonctionnement de l’appareil.
Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section
2.5 de RSS 102 etla conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir
l’information canadienne surl’exposition et la conformité de rf.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune
autre antenne ouémetteur. Cet équipement devrait être installé et actionné avec une
distance minimum de 20 centimètres entre le radiateur et votre corps.
ENGLISH
Entertain LED Speaker Light
Entertain LED Speaker Li
ght
PL
-0246
INS200565 REV042220
B
C
A
Charging Indicator
Magnetic Base
On / Off /
Brightness /
Color Modes
Volume Up
On / Off / Play / Pause
Volume Down
Bluetooth Connection Indicator
Charging Indicator
Magnetic Base
On / Off /
Brightness /
Color Modes
Volume Up
On / Off / Play / Pause
Volume Down
Bluetooth Connection Indicator
The device has been evaluated to meet general RF exposure requirment. The device can
be used in portable exposure condition without restriction.ÿÿThis equipment should be
installed and operated with minimum distance 20cm between the radiator &you body.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.