Operation Manual

When changing the adjustments originally made in the factory, two other component groups of

the wheelchair must be readjusted, refer to sections 6.3 and 6.4.

6.3 Caster wheels

Adjusting the caster wheel journal angle (Fig. 26)

After the rear wheels have been mounted in the appropriate position, the caster wheel journal

angle must be readjusted.

The threaded axle should be as horizontal as possible in relation to the ground to ensure optimal

driving behavior of the wheelchair. The caster adapter allows for continuous angle adjustment.

INFORMATION!

Loosen the two screws A between caster adapter and frame (Fig. 26).

Now you can move the caster adapter along the frame tube. The level (included

in delivery) will help you position the threaded axle as vertically to the ground as

possible.

INFORMATION!

Make sure to firmly retighten all oval head screws. The proper torque is 8 Nm

(Fig. 26).