Operation Manual

52
6.7 Adjusting the height of the footrest (Fig. 29)
INFORMATION!
By loosening the set screw, the footplate can be adapted to your lower leg length
and to the thickness of your seat cushion.
INFORMATION!
Make sure when adjusting the footrest height, that the footrest bar is slid into the
swivel segment at least 40 mm. A marking on the footrest bar indicates how far the
bar should be slid in.
INFORMATION!
After having made adjustments, retighten the set screw to a torque of 6 Nm.
29
6.8. Adjusting the angle of the elevating footrest (Fig. 30)
Turn the release lever until it hits the stop. While propping up the footrest bar, set the desired
angle. Then carefully let the release lever turn back. At the next free position, the footrest will
snap into place.
30