Use and Care Manual

13
PIEZO IGNITION
1. Turn the operating knob to the Off position (the
indicators must point to the “0” symbol). Stand
to the side of the Otto Lite as it is possible that
flames will escape during the ignition process.
! WARNING: Before opening the valve
on the propane gas cylinder, both operating
knobs must be in the Off position and must
not already be pushed down.
2. Open the valve on the propane gas cylinder by
turning the gas cylinder valve counterclockwise.
! WARNING: Never put your head in
or directly in front of the grilling chamber
of your Otto Lite to test whether the
burners are al ready ignited or ever while
operating the appliance. During the entire
ignition process, keep your face and body
at least 15" / 38 cm away from the front ope-
ning as flames may escape from the grilling
area while igniting the gas
3.
Turn the operating knob for into the ignite
position (the indicator on the operating knob
is pointing to ) and push down the opera-
ting knob.
4. With the operating knob pushed down, wait
3-5 seconds and then press the red button on the
piezo igniter, located directly next to the opera-
ting knob. When you hear the ignition noise,
keep the ope rating knob pushed down for a
further 5 seconds before letting go. You may
need to use the piezo igniter multiple times
before ignition occurs.
5. Check whether the burner has ignited. To do so,
whilst keeping at least 15“ / 38 cm away, look into
the front opening of your Otto Lite. You shouldbe
able
to see a flame underneath the ignited
ceramic burner.
! DANGER: Should the flame get extinguished
by accident, turn the operating knob for
the burner to the starting position and close
the valve on the propane gas cylinder.
Wait at least 5 minutes before reattempting
to ignite the burner using the piezo igniter or
a match, to allow unburnt gas to escape from
the inner area of your Otto Lite.
WARNING
!
Every single time, before you use your
Otto Lite, check the gas hose for kinks,
cracks, abrasion, wear or cuts. If you
establish that the gas hose is damaged,
do not use the grill until you have repla-
ced it. The gas hose must be replaced
with one that is approved by Otto
Wilde
Grillers. Contact your retailer or our custo
-
mer services department for more infor
-
mation
.