INFRARED TECHNOLOGY ENGLISH UFO user manual WARNING! UFO user manual 21 Do not use the heater in vertical position
Distinguished Customer, You have purchased a high quality, efficient and original UFO Infrared Heater. We would like to express our gratitude to you for your appropriate choice and confidence in UFO. This manual has been designed for our UFO Star (UFO-E) and UFO UK (UFO-R) models. ENGLISH Please read this manual thoroughly in order to attain a sustainable satisfaction with your heater. Please stick to the items in "Safety Instructions” section with strict observance.
1. TABLE OF CONTENTS 1. TABLE OF CONTENTS.............................................................................................. 1 2. SAFETY INSTRUCTIONS.......................................................................................... 2 2.1 Electrical Connection....................................................................................... 2 2.2 Safety and fire protection................................................................................. 2 2.
2. SAFETY INSTRUCTIONS ENGLISH 2.1 Electrical Connection • Check whether your appliance and power cord are damaged before operating your appliance. If yes, do not plug your heater and contact with authorized technical service. • Check whether there is any crack, disjoint or scratch on the filament (heating tube). If any, do not plug your heater and contact with authorized technical service.
2.4 Installation Distances and Safety Clearances 2.5 Repair and Service • Attention! Only technical services and persons authorized by SUN may serve, repair and replace the parts of this heater (see page 18). 2.6 UFO outdoor use UFO-E heaters feature IP34 certificate. This IP certificate (Ingress Protection) refers that they provide protection against large objects with diameter over 2.5mm and against water spilling from any direction.
3. INSTALLATION INSTRUCTIONS 3.1 Installation Instructions Attention! The appliance must be installed at level on solid surfaces. See pages 4-7 to come up with the most appropriate installation method for your UFO. ENGLISH Figure 2 Figure 1 Figure 3 1. Drill four 8 mm (5/16’’) diameter holes on the wall to the place where the unit will be placed with the distances shown in (Figure-1) 2. Insert the wall anchors supplied with the unit into the holes. 3.
3.
3.3 Installation Position Attention! The heater must be installed in horizontal position only. Never install your device with an angle greater than 5 °. In case of operations in angles larger than 5º the heating loop wire may fall into disuse shortly. ENGLISH WRONG WRONG RIGHT 3.4 Right and Wrong Installations Positions Direct your heater towards the most appropriate angle.
4.
5. HEATERS DIMENSIONS AND HEATING AREA D H L ENGLISH UFO UK (UFO-R) Models UFO-R/UKL2 Volts Hertz (V) (Hz) 120 60 Power (Watts) Heating Area Outdoor m2 (pi2) Indoor m2 (pi2) Min. 1020 Min. 6 (65) Min. 9 (97) Max. 1700 Max. 10 (108) Max. 15 (161) H cm (in.) Dimensions D L cm (in.) 19 10 (7 1/2) (3 15/16) cm (in.
6. OPERATING INSTRUCTIONS 6.1 UFO Star (UFO-E) Heat control by the regulator ENGLISH The regulator adjustment is conducted in accordance with required room temperature. The heater operates constantly when the regulator is in the highest mode. Switch the regulator on the highest mode to heat the cold rooms. When desired room temperature has been attained, the heater may be operated with certain intervals adjusting the regulator.
6.2 UFO UK (UFO-R) Inserting Batteries Insert 2 AAA/ Alkaline type batteries into your Remote Control. 1. Flip the backside of your remote control 2. Pull out battery cover. 3. Insert the batteries in accordance with the instructions and polarity of the batteries. ENGLISH To change the batteries, do the same way depicted above Notice : Replace the old batteries with the same type batteries. Otherwise, your heater may not function well.
6.2.
6.2.2 Definitions of the Buttons on the Remote Control The functions of your heater may be controlled via the buttons on your remote control and LCD screen. You may also control some of the functions of your heater through the buttons on the front side of the heater: 1. On / Off Switches on or off the heater or stands it by. 2. 5 / 6 Program Up / Down (+/-) Adjusts heater intensity setting from 1 to 5. ENGLISH 9 1 2 3 4 5 6 8 7 3. Clock Sets the remote time. 4.
6.2.3 Operation of the Remote Control Power Mode Adjustment: Press the button « On/Off » to turn on the heater. The power mode indicator will display (H1). Note: The heater starts operating at the power level mode at which it has been switched off. Press « 56 » buttons to adjust the power level of the heater. Time settings Attention! Time settings are to be conducted for the rest of the functions to operate. Ajusting the time (Clock) : Press « Clock » button. Press « 56 » buttons to set hour and minutes.
Sleep Timer Settings: Attention! The time of the remote is to be set precisely and the heater is to be operating before using Sleep Timer function. ENGLISH Press « Sleep » button. Press « 56 » button to set sleep time from 1 to 12 hours. Press « Sleep » button to save your settings. Remaining time will appear on the screen. Note : • At any time, press « Cancel » button to cancel all time settings.
6.2.4 Control through the main module on the heater The button on the left functions as ON / OFF. « H0 » indicator appears on the screen when the heater is switched ON and it is in stand by mode. (The 1st digit on the screen illustrates H symbol while 2nd digit illustrates power level mode from 1 to 5). Press the right button on the heater to adjust power mode from 1 to 5 (H1, H2, H3, H4 and H5). Note: The heater starts operating at the power level mode at which it has been switched off.
7. DIFFERENCE AMONG UFO MODELS AND SPECIFICATIONS Models Star (UFO-E) INFRARED TECHNOLOGY Body color Warranty ENGLISH Element service life* Naturel UK (UFO-R) 3 Champagne 3 3 years 3 ± 8000h 3 ± 9000h 3 3 Plastic cover Holley 3 Outdoor use IP34 3 Power cord length 2.75 m 3 Remote control IR- control Reflector Aluminum 3 3 Reflector side part Aluminum 3 3 Grid wire 16 x 16 x 1.2 mm 3 3 240V (AC) 3 Voltage Frequency * In normal use.
8. MAINTENANCE AND CLEANING INSTRUCTIONS 8.1 Maintenance Attention! Careful and regular maintenance of UFO infrared heater considering these instructions assume great importance so as to attain a long and efficient operation of your heater. 1- Check the filthiness of the reflector and IR – filament at least once a month. If necessary, apply cleaning and maintenance instructions. 2- The frequency and number of maintenance check must be adjusted by considering the operating environment of the heater.
9. TECHNICAL SERVICE Attention! Only technical services and persons authorized by SUN may serve, repair and replace the spare parts of this heater. Points to be considered before shipping the product to the technical service: ENGLISH 1. Make sure that the plug, to which the appliance is connected, has power, check the breaker and power cord. If the plug lacks power, consult to an electrician. 2. Make sure that the appliance has been installed in accordance with the instructions in the manual.
10. LIMITED WARRANTY Should this product be proven defective in workmanship or material, the consumer's sole remedies shall be such repair or replacement as provided by the terms of this warranty. Under no circumstances shall SUN be liable for any loss or damage, direct, consequential, or incidental, arising out of the use of or inability to use this product. Attention! Faulty maintenance and cleaning are not covered by the warranty. The warranty does not cover the situations below: 1.
ENGLISH Notes 20 UFO user manual
Distribué par / Distributed by: 180, 3e Avenue, L’Islet (Québec) G0R 2C0 CANADA Phone: 1 800 463-7043 • 418 247-3947 Fax: 1 800 662-7801 • 418 247-7801 info@ouellet.com • www.ouellet.com INS475 - Rev. 4 - 07/2014 SUN Pazarlama Elk. Makina. Tic. Ltd. Şti.