Product Card

WP3
Thanks for choosing OUKITEL products
158.6mm
75.8mm
15.3mm
257.8g
158.6mm
75.8mm
15.3mm
257.8g
158.6mm
75.8mm
15.3mm
257.8g
257.8
Cortex-A53 up to 2.0 GHz *8
ARM Mail-G71 MP2 up to 700MHz
Cortex-A53 up to 2.0 GHz *8
ARM Mail-G71 MP2 up to 700MHz
Cortex-A53 up to 2.0 GHz *8
ARM Mail-G71 MP2 up to 700MHz
Cortex-A53 up to 2.0 GHz *8
ARM Mail-G71 MP2 up to 700MHz
وتغ كابل *1
بطاقة SIM دبوس *1
دليل متعدد اللغات *1
شاحن *1
بطاقة الضمان *1
سماعة تحويل الكابلات *1
كابل USB *1
OTG кабель
Cable OTG
Câble OTG
2G: 850/900/1800/1900
3G: B1/B2/B4/B5/B8
4G: B1/B2/B3/B4/B5/B7/B8/B12/B17/
B19/B20/
2G: 850/900/1800/1900
3G: B1/B2/B4/B5/B8
4G: B1/B2/B3/B4/B5/B7/B8/B12/B17/
B19/B20
2G: 850/900/1800/1900
3G: B1/B2/B4/B5/B8
4G: B1/B2/B3/B4/B5/B7/B8/B12/B17/
B19/B20
850/900/1800/1900
B1/B2/B4/B5/B8
B1/B2/B3/B4/B5/B7/B8/B12/B17/
B19/B20
158.6
75.8
15.3
52 00 mA h,5 V/2 A
1 * гарантийный талон
4GB
64
13.0MP
5.0MP
Android
9 Pie
128
1 *
Адаптер для наушников
5.5 ” HD+
1 *
черный
Android es una marca registrada de Google LCC
Android est une marque commerciale de Google LCC
Android هي علامة تجارية لشركة Google LCC
5200mAh 5V
/
2A
1* Tarjeta de garantía
4GB
64
13.0MP
5.0MP
5.5
" HD+
Android
9 Pie
128
Câbled’ Adapteurd’ écouteur
1 *
Negro
5V/2A5200mAh，
Noir
1* Carte de Garantie
4GB
64GB
13.0MP
5.0MP
HD+ 5.5"
Android
9 Pie
128
1*
5V/2A 5200
4
64
HD+ Touchscreen 5.5”
5.0
13.0
4G
Android
9 Pie
128
أسود
Android является товарным знаком Google LCC
Smart Phone
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Absorption Rate (SAR) information:
This mobile phone meets the government's requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of
all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. This device was tested
for typical body-worn operations with the back of the handset kept 1.0cm from the body.
To maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 1.0cm separation distance between the user's body and the back of the handset.
The use of belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 1.0 cm
must be maintained between the user's body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories
used by this device should not contain any metallic components. Body-worn accessories
that do not meet these requirements may not comply
with RF exposure requirements and should be avoided.
Use only the supplied or an approved antenna.
FCC ID: 2ANMU-WP3