User Manual

2 pcs
1 pcs
1 pcs
1 pcs
1
Product details
Wearing details
How to Use?
FAQ and Solutions Warranty Card
Indicator description:
Enter Settings Select Bluetooth Options
Bluetooth Connection Successful
Warranty certificate, please fill in and keep it safely
Phenomenon
Failure Reason Solution
ProductName:
Functional operation：
NEXT Songs
Double click
3 times 3 times
earbud（R)
PREV Songs
earbud（L)
Other equipment
Not connect
Connected
Set up
Bluetooth Close
L for Left ear R for Right ear
Head with ear cap facing
down, small head up to
the suitable position
Sales date:
Shop:
After sale service:
3.Protocol: Supports HFP 1.7, HSP 1.2, A2DP 1
AVRCP 1.6, SPP 1.2 and PBAP 1.0
4.Chipset: BT8832A
5.Working distance: 10M
6.Call Time: 4-5H (1 time full charged)
7.Play Music Time: 4-5H (1 time full charged)
8.Standby time:650H (With charger case)
9.Frequency:2402MHz~2480MHz
10.Battery type: 3.7V, >50mA Li Battery
11.Charging Time: 1-2H
12.Working Temperature: -10°-55°
Specification of charger case:
1.Input current:5V---1A
2.Output current:5V----1A
3.Charging time:1-2H
1. Make sure that the charging case has electricity. If the charging
compartment is out of power, please fully charge the charging
compartment;
(Pick up the two earbuds and put them back on the cover. The
charging compartment indicator lights up to indicate that there is
power. If it does not light, it means no power.)
2. Take the two earbuds out of the charging case and wear them
on the left and right ears respectively. The earphones will
Warming Note:For the first time to use the earbuds or for a long
time to no use, please charge the charging case and earphones
before, Please keep it i
n an unobstructed and effective
environment within 10 meters. Otherwise, it may be stuck and
disconnected.
1. Charge the earbuds: Put the earbuds into the charging case
and cover it to charge.
earbuds indicator: Lights up red when charging, and red light
when fully charged. The charging case flashes green and the light
is off after charging.
2.Charge the charging case: Plug the 5V/1A USB into the
charging port to charge. The 4 grids are all filled with bright blue
lights, indicating that the battery is fully charged.
Charging case indicator light:Charging bright blue li
ght, after the
charge is completed, the light is off.
3.Charge to the mobile phone; take the USB connection to the
charging case discharge port to charge the mobile phone.
Charging case indicator light: The charging light is blue, and the
light is off after charging.
Turn on: Press the multi-function button for 3 seconds to boot, or
take it out from the charging case, the earbuds will be turned on
automatically
Turn off:Press the multi-function button for 5 seconds (red light is
always on) to shut down, or directly put the earbuds back into the
charging case, the earbuds automatica
lly turns red and
automatically turns off.
Answer and hang up:When phone coming,short press the button
Start Siri: Long press Right earbud or Left earbud for 1s you will
hear “DU”, release and
phone voice control is started. Siri supported only
NEXT/PREV Songs: Double click on the LEFT earbud(R), it plays
next song, double click on the L earbud, it plays previous song
Volume +/-: Constinuous press right earbud 3 times to turn up the
volume; continuous press left earbud 3 times to turn down the
volume, or you can adjust the volume on the phone directly.
Double click
Volume+ Volume-
earbud（R)
earbud（L)
Single Earbud Mode
When the main earbud (R) and the secondary earbud (L) are not
connected, taking out one of any of the earbuds separately from
the charging case. The earbud prompts “turn on”, then for 3
seconds, the blue light flashes---the red and blue lights flash
alternately, open the mobile phone Bluetooth function, search for
the Bluetooth device and Click Connect, the “Bluetooth
Connected ” will be displayed in the upper right corner of the
phone screen, and the earbud will prompt “Connected”, or the
manual operation of a single earbud will repeat the above
operation.
More than two times use
: the earbuds has been connected with
the mobile phone--- open the phone Bluetooth, and take out the
two earbuds from the charging case, without any operation, it will
connect with the phone automatically . If you use a different
phone, you need to follow the steps in the instructions for use.
Special Note:
The two earbuds are well paired before packaged, but if they can
not paired well due to some wrong operations, pls. do as following
steps to re-pair the earbuds. Power off the two earbuds, then
press the button of the two earbuds at same time and do not
release for about 10s, blue lights sparkled -
---> red and blue
lights sparkled alternatively ---> release --->two earbuds are in
the situation of paired, and they are ready for phone searching.
Note: This operation also clears the team record between the
phone and the earbuds, so you need to delete the Bluetooth
pairing record before the phone and then search for the
connection again.
Care and maintenance:
1. Put the Bluetooth headset into the pocket before putting the
Bluetooth earbuds into the pocket to avoid misuse caused by the
collision.
2. Do not use a abrasive cleaner to clean the Bluetooth earbuds.
3. Do not expo
se the Bluetooth earbuds to excessive
temperature.
4. Do not expose the Bluetooth earbuds for a long time.
5. Do not let the Bluetooth earbuds be close to the fire source.
6. Do not drop, bump, scratch, twist, tap, crush, or put into the
water.
7. Keep away from magnets, appliances and speakers when using
Bluetooth earbuds.
8. Do not place the Bluetooth earbuds in extreme temperature
(use ambient operating temperature range -10°C-55°C)
9. Do not expose the Bluetooth earbuds to moisture.
10. If you do not use the Bluetooth earbuds for a long time, please
charge it fully and charge it once a w
eek to extend the life of the
Bluetooth earbuds.
Safety guidance:
1, please use the standard 5V charger (4.9-5.5V)
2. Do not place the charging case and the Bluetooth earbuds next
to the flammable explosives.
3. Do not disassemble the charging case and Bluetooth earbuds,
or insert other items into the product to avoid damage to the
product or even cause harm to you.
Serious warning:
Do not use this product while charging. Please use the adapter
specified by the manufacturer to charge the product. Do not
disassemble the built-in lithium battery. Do not let the metal
contact or shor
t the electrode. Do not touch or squeeze the
battery to avoid Place in a humid or hot (>60 ° C) environment.
Commodity warranty card
(warranty details)
1. From the date of purchase to the warranty period of three months,
if the machine fails, the technician will confirm that the fault is under
normal use, and free repair and spare parts replacement service will
be provided.
2. The company will refuse to provide warranty service in the
following circumstances;
a. The product has been mishandled, negligently used or
accidentally caused by natural disasters and man-made disa
sters.
b. The product is repaired and modified by non-technical personnel
of the company.
c. The product body number has been converted, altered or
removed.
d. The product does not provide installation instructions according
to the original factory.
Third, the free service provided by this warranty card does not
include product accessories, and other decorations and other items.
4. The Company will not be liable for any direct or indirect loss of
equipment damage.
5. The contents of this warranty card are subject to change without
prior notice.
Can not turn on /
Turn off automaticly
Low battery
Charge the earbuds
for 2-5H
No hint after paired Not paired correctly Re-paired
Can talk but red
light is on
Red light is on for
lower battery
Charge for the
earbuds
No lights on
when charging
No output from
power supply
Check the power supply
if connected weill
Echo
Too large volume or too
noisy environmental
Turn down the volume or
change the environmental
There is noise
when talking
Environmental disturbance
or too far away from device
Change the environment or
move to place near the device
Low voice Not wear earbuds correctly Adjust the position of earbuds
Can not hear the music The phone doesn’t support Need a phone support BT stereo
Bluetooth earbud
Charger case
User manua
Certification
Eartips
Use charger line
3 sizes(Big,Medium,small)
pcs
Set up
Bluetooth Close
Set up
Bluetooth
Bluetooth
Set up
Bluetooth
Bluetooth
Name of device Name of device
Other equipment
Charger Case Indicator screen
Indicator light
Earphones’ Indicator light
Multifunctional Button
Reject the phone: Press the Multi-function button for 3s,reject the phone
one time,answer the phone,short press the button one time when call end
A13
Specification of earphones
1.Product Name: A
13
2.Bluetooth Version: Version 5.1
A13
A13
Click Bluetooth to enter the connection
Ensure Bluetooth is on
Search device name:
A13
Clock button function:
Earphones User Manual
automatically turn on and automa
tically pair;
(Voice prompt: power on, left channel, right channel, waiting for
connection).
3.Turn on the phone Bluetooth and click on the connection pair
name " A
13
" to connect (voice prompt "Connected").
4.How to use Speaker:Short Press the speaker Button and turn on
it,the earphones connect with the mobile phone
automatically,short press the speaker button again, turn off the
speaker,and the earphones will be charged again
How to Pair?
Cl ock —————— ——- Fl ashl i ght