OutBack Power FLEXMax Series Owner's Manual

Operation
34 900-0009-01-00 Rev C
Float (AUX Mode)
This mode is intended to operate a load when the FLEXmax is in the Float stage of charging the
batteries.
Figure 24 Setting the Float Mode
To set the mode for Float:
1. From the main menu, press <> or <> to move the
 to the left of Aux.
2. Press <GO> to open the AUX MODE screen.
3. Press <NEXT> until Float is displayed in the AUX MODE
screen.
4. Press <MODE> to cycle through the mode set points ON,
OFF, or AUTO.
 ON activates the AUX output.
 OFF deactivates the AUX output.
 AUTO controls the output according to the criteria
of the selected AUX mode.
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Main Menu
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
AUX MODE 
Float
Output: Off Off
EXIT NEXT SET MODE
<NEXT> proceeds to the
next AUX MODE screen.
To Exit:
 Press <EXIT> once to return to the main menu.
 Press <EXIT> twice to return to the status screen.