Mate Specifications

55
NOTE:echarger’soperationisindependentoftheinverter.WiththeinverterinOFFmode,
the charger can be set to come on when AC is available, but have the inverter stay o when AC
is disconnected.
<OFF>disablesallchargerfunctionsintheFX.
<AUTO> enables automatic battery charging, silent, and “re-oat” when an AC input source is
connected.
<ON>alsorechargesthebatteries,buteventuallyremainsinthe“oat”chargingstage(and
eliminatessilentmode)untiltheACinputisdisconnected.
<OK>returnstothepointinthemenusystemwhereyouenteredtheCHARGERCONTROL
screen.
PRESSFOURTIMES:
CHARGER MODE CONTROL
global charger mode
BULK EQ OK
• eCHARGERMODECONTROLscreen
appears allowing the MATE to issue system
(global)rechargingcommands.
• Pressing<BULK>bringsuptheBULK
CONTROLscreenandstartsanewrecharging
cycle.PleaseseetheFXandChargeController
product manuals for more information.
eBULKCONTROL
screen allows the user to
manually start or stop a bulk
charge cycle by pressing the
<START> or <STOP> so
keys respectively.
NOTE:BothOutbackChargeControllerandFXproductsconnectedtotheHUBwillrespond
toglobalEQandBULKchargercommands.
NOTE:GlobalcommandsapplytotheChargeControllersandFXsconnectedtoaHUB.
BULK CONTROL
START STOP OK
BULK CONTROL
bulk charge started
OK MAIN
BULK CONTROL
bulk charge stopped
OK MAIN