OutBack Power Programming Guide

Page 42
Page 43
W-4. Profile Settings
This section shows the process of customizing all system elements. The screen progression shown is the
same whether A is selected in the New Profile, Existing Profile, or Restore Profile menus.
Note that Wizard profiles are useful for rapid setup of multiple devices, but they do not configure the entire
system. Items not covered include inverter stacking (see I-9 on page 14), charge controller float coordination
(see M-6 on page 37), and many system settings (see S-1 beginning on page 4). In addition, if settings are
made in the wrong order, the Wizard may overwrite some customized settings. To ensure that all settings are
made correctly and retained, make certain to follow the Recommended Programming Order on page 4.
C
D
Wizard Battery Charging (C):
 Absorb Voltage/Time
 Float Voltage/Time
 Equalize Voltage/Time
 Re-Float Voltage
A
B
Wizard Date & Time (A):
 Hour, Minute, Day,
Month, Year, Weekday
Wizard System Type (B):
 System Type (Off Grid,
Grid Tied, Backup)
 System Voltage (Vdc)
B
C
 Array Wattage
 Battery Type (FLA, Gel,
AGM) and Capacity (Ah)
Wizard Generator Configuration (F):
 Generator Installed (Y or N)
 Generator Type (AC or DC) and Size (kW)
 Generator Start (Manual or Auto)
 AUX Output Port
F
G
Wizard AC Configuration (D):
 AC Output Voltage (Vac)
 AC Phase
(Single, Split, 3-Phase)
 AC Input Breaker Size (Aac)
 Maximum Output Load (Aac)
D
E
Wizard AC Input Limits (E):
 Grid Lower Voltage Limit (Vac)
 Grid Upper Voltage Limit (Vac)
 Gen Lower Voltage Limit (Vac)
 Grid Upper Voltage Limit (Vac)
F
E
Wizard Grid Use Schedule (G):
 Period 1, 2, and 3
Enable — (N or Y)
 Weekday
 Use — 0:00 to 23:59
 Drop — 0:00 to 23:59
 Weekend
 Use — 0:00 to 23:59
 Drop — 0:00 to 23:59
G
Wizard Battery Monitor (I)
 Shunt A
 Connection —
Disabled, Inverter,
Charge Controller,
DC Load, DC Gen,
Wind Turbine, Hydro
(these names can be used
to identify each shunt)
J
I
H
Wizard High Battery Transfer (H):
 Mode (Enabled or Disabled)
 Grid Connect
 xx.x VDC
 Delay xx Min
 SOC xx%
I
 Grid Disconnect
 xx.x VDC
 Delay xx min
 SOC xx%
H
Profile WizardProfile Wizard
900-0125-12-01 Rev A
©2017 OutBack Power Technologies. All Rights Reserved.