- Outback Power Maximum Power Point Tracking Charge Controller Model MX60 PV MPPT Installation, Programming and User's Manual

OutBack Power Systems Inc.

BATTERY SYSTEM VOLTAGE

• The MX60’s default setting is for a 12 VDC battery.

• Change the setting after powering up the MX60 if a di erent battery voltage is used.

• The PV array voltage—which must not exceed 150 VDC open circuit—is automatically detected.

 KEY TO THE EXAMPLE DIAGRAMS 

Soft keys:

Solid black indicates key is to be pressed:

Down arrow will lead to the next screen:

Up arrow points to one or more keys that will change a value:

The keys correspond to any text immediately above them.

(#1) (#2) (#3) (#4)