- Outback Power Maximum Power Point Tracking Charge Controller Model MX60 PV MPPT Installation, Programming and User's Manual

OutBack Power Systems Inc.

PREPARING FOR RECHARGING

Turn the PV input breaker on. The MX60

automatically detects the PV input voltage.

(Note: If PV voltage registers “000V” when the breaker

is on, please check the polarity of the PV wires.)

After 5 seconds of stable input voltage, the MX60

enters a “Wakeup” stage, transitions to “Sweeping”

and prepares to charge the batteries by tracking the

MPP of the solar array.

PV 113 V Bat 12.5 V

00.0 A 00.0 A

Watts 0000 Aux Off

kWHrs 00.0 Sleeping

PV 087 V Bat 12.5 V

05.0 A 32.9 A

Watts 0412 Aux Off

kWHrs 00.0 B-MPPT