- Outback Power Maximum Power Point Tracking Charge Controller Model MX60 PV MPPT Installation, Programming and User's Manual

27
OutBack Power Systems Inc.
To adjust the minimum amount of time the PV volt-
age must remain high before deactivating the AUX
MODE, press the <TIME> soft key.
Press the < - > or the < + > soft key to adjust the
Hold Time, then press the <BACK> soft key to return
to the PV Trigger screen. In this example, the AUX
MODE will remain active for 1.1 sec after the PV volt-
age is below the PV Trigger voltage before deactivat-
ing the PV Trigger and reconnecting to the array.
Press the <NEXT> soft key to view the Float screen.
The AUX MODE is active when the MX60 is in Float
and producing power. Press the <NEXT> soft key to
advance to the ERROR ALARM screen.
AUX MODE
PV Trigger
On
EXIT NEXT TIME VOLT
Hold Time Sec
01.1
BACK - +
AUX MODE
PV Trigger
Off
EXIT NEXT TIME VOLT
AUX MODE
Float
Off
EXIT NEXT