- Outback Power Maximum Power Point Tracking Charge Controller Model MX60 PV MPPT Installation, Programming and User's Manual

40
OutBack Power Systems Inc.
When the Upper Limit is displayed, the desired com-
pensated voltage has been stored and the < - > and
< + > soft keys can be released.
After setting these limits, AUX MODE should be set to
Manual (default setting) if not used.
Note: WIDE/LMIT voltages are not applicable in the
Equalize charging mode.
Pressing the <BACK> soft key returns to the Low Batt
Disconnect screen.
To con rm the Upper Limit and Lower Limit voltages
Limit Set Points (visible and
active when WIDE/LMIT is set
to LMIT in the Misc Menu)
RE-CONNECT VOLTS
>14.8
Upper Limit
BACK - + DisV
*Charger Aux Light
EQ Misc Advance
Logging *Log2
EXIT   GO
PkBatV Voc HiVoc
014.7 021.2 022.1
B-MPPT Sunrise
EXIT NEXT 00:03:43
PV 011 V Bat 13.4 V
00.0 A 00.0 A
Watts 0000 Aux On
kWHrs 00.0 Sleeping
PkBatV Voc HiVoc
014.7 021.2 022.1
B-MPPT Sunrise
EXIT NEXT 00:03:43
0000 fl oatTmin
0850 HighWatts
Lo 13.2 Hi 14.8
BACK DCkWh