Outback Power M Series Mobile/Marine Specifications Sheet

1
• Modular, stackable design
• Remote temperature sensor
• High operating efficiency
• Corrosion resistant internal components
• Field serviceable
• Neutral/ground switching
• Integrated network communications
• UL458 certified
OutBack Power’s M-Series inverter/chargers
provide true sinewave power output, and
intelligent battery charging.
The M-Series inverter/chargers are modularly expandable to your
power needs. A DC to AC inverter, battery charger, AC transfer
switch, and 30A pass through and neutral/ground switching provides
a complete power conversion solution. All OutBack Power inverter/
chargers produce virtually distortion free sinewave AC power for
onboard electronics, such as sensitive home theater equipment and
microwaves with minimal RF interference.
Industry leading surge power starts heavy loads such as air conditioners
or pumps. Power factor corrected battery charging gets the most
out of your shore cord and generator while maximizing the life
and performance of your batteries. An ultra fast AC transfer switch
with neutral/ground switching seamlessly transfers shore power
without dropping loads. Modular expandability through networked
communications allows your inverter system to grow with your power
consumption needs. The OutBack Power M-Series inverter/charger is
the superior choice when you need a reliable, powerful and modular
true sinewave inverter/charger.
M Series
60Hz/120V Mobile/Marine Inverter/Chargers
VENTED VFX
SEALED FX
SUB PANEL
LOAD ENERGY STORAGE
POWER FLOW
GRID
MAIN PANEL
FLEXPOWER TWO
PV SOURCE