Outback FXR Series Operator's Manual

900-0167-01-01 Rev A 45
Metering
MATE3-Class System Display Screens
A MATE3-class system display can monitor the inverter and other networked devices. From the
Home screen, the <
Inverter
> “soft” key accesses the inverter monitoring screens.
Figure 9 Home Screen
Inverter Screen
The Inverter soft key opens a screen showing the inverter operating mode, battery voltage, and
status of several AC operations. The
<
Port
>
soft key will select other networked OutBack
inverters, if present. The
<
Next
>
soft key accesses the Battery screen.
Figure 10 Inverter Screens
Screen items:

The upper left corner is the
Inverter Mode
(see above). (If the selected inverter is a slave, only a few
mode
s are possible.) When
Charging
is indicated, the
Charge Mode
specifies the stage.

Invert
displays the kilowatts and AC amperage generated by the inverter. It may go to loads, or in a
grid-interactiv
e system it may
be sold back to the utility grid.

Charge
displays the kilowatts and AC amperage consumed for the inverter to charge the ba
ttery
ban
k. This line also shows the present charging stag
e.
Inverter Soft Key
Inverter Modes:

Inverting
(see page 22)

Searching
(see page 24)

Support
(see page 14)

Sell
(see page 16)

Charging
(see
Bulk
on page 31)

Charger Off
(see pages 27 and 31)

Float
(see page 32)

EQ
(see page 35)

Silent
(see page 32)

PassThru
(see page 27)

Error
(see page 52)

Of
f
Charge Mode Inverter Mode
Inverter Modes
(slave):

Slave On

Slave Off

Error
Charge Modes:

BULK

FLOAT

E
Q