Product Specifications
OutBack reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2016 OutBack Power. All Rights Reserved. OutBack
is a registered trademark of The Alpha Group.
OutBack provides a fully-compliant PV rapid shutdown
system (PVRSS) combiner solution with the FLEXware ICS
Plus. The FLEXware ICS Plus meets the following 2014
National Electric Code (NEC) requirements:
NEC 690.11—Arc fault protection (protects against arc faults due to
loose connections, damaged wires or other DC component failures)
NEC 690.12—Rapid shutdown (provides a means for rst responders to
safely de-energize controlled conductors)
NEC 690.15—DC combiner disconnect (opens all ungrounded circuit
conductors from all sources of power)
The FLEXware ICS Plus is rated to 600VDC for integration in a wide range
of systems and designed for ease of service and clean wire management.
Packaged systems include easy-to-order, complete solutions for battery-
based systems requiring one, two or four combiner boxes,
while individual components can be ordered for alternative system
needs, including use with grid-direct PV inverters.
When used with OutBack power conversion and energy storage
components, the system will represent the only single-brand UL and
NEC-compliant solution from rooftop to battery.
End-to-end solution listed to UL1741 with photovoltaic
rapid shutdown systems (PVRSS)
Arc fault circuit interrupter (AFCI) listed to UL1699B with
local and remote indication
Type 3R enclosures rated for indoor or
outdoor installation
Flexible design—install the combiner box vertically or
horizontally and mount to racking or under an array
Interoperable with compatible third-party PV rapid
shutdown devices (PVRSE with dry contact)
Three complete packages simplies the design and
ordering process
Rapid Shutdown Initiator (RSI)
FLEXware ICS Plus
Integrated Combiner Solution for PV Rapid Shutdown and AFCI
FWPV6-FH600-SDA
ICSPLUS-1 Package for Battery-Based PV Systems
PNL-75-DC-RT
BKR-CTRL-DC