PV Array Breakers Data Sheet
OutBack reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2019 OutBack Power. All Rights Reserved. OutBack is a registered trademark of Alpha Technologies Services, Inc.
Features:
• DIN rail mount with set-screw
compression terminals
• #14 to 2 AWG (1.62 to 6.54 mm diameter)
clamp terminals
• DIN Rail End Clamp FW-EC-DIN
accessory available
PV Array Breakers
System Components and Accessories
*Approved for maximum VOC of 150VDC for PV array applications only
980-0054-01-00 REV A
www.outbackpower.com
Model Current Rating Voltage Rating* Terminals Width (in/mm)
DIN-1-DC 1A 125VDC Single pole 0.5 / 13
DIN-2-DC 2A 150VDC Single pole 0.5 / 13
DIN-3-DC 3A 150VDC Single pole 0.5 / 13
DIN-4-DC 4A 150VDC Single pole 0.5 / 13
DIN-5-DC 5A 150VDC Single pole 0.5 / 13
DIN-6-DC 6A 150VDC Single pole 0.5 / 13
DIN-8-DC 8A 150VDC Single pole 0.5 / 13
DIN9-DC 9A 150VDC Single pole 0.5 / 13
DIN-10-DC 10A 150VDC Single pole 0.5 / 13
DIN-15-DC 15A 150VDC Single pole 0.5 / 13
DIN-20-DC 20A 125VDC Single pole 0.5 / 13
DIN-30-DC 30A 125VDC Single pole 0.5 / 13
DIN-50-DC 50A 125VDC Single pole 0.5 / 13
DIN-60-DC 60A 125VDC Single pole 0.5 / 13
PV Array Breakers Specifications 02/2019