Outback EnergyCell RE High Capacity Manual

14
www.enersys.com
Publication No. US-VR-OM-002
March 2008
6.0 UNPACKING AND HANDLING FOR INSTALLATION
6.1 General
Battery modules are shipped upright on pallets. All accessories for installation and use are
supplied as optional prepackaged kits and are shipped on separate pallet(s) and/or in box(es).
Cells may be packed in wooden boxes, which must be opened completely and carefully. The
cells
must then be handled as described in the appropriate Installation Manual.
DO NOT lift any cell by the terminal posts
as this will void the warranty. When lifting large
cells/units with crane, hoist or similar device, use lifting belt(s) and pr
otective styrofoam
shipping cover(s) provided (when applicable).
DO NOT attempt to remove the pressure relief valves or vent covers as this will void the
warranty. Attempted removal may also damage the vent and prevent proper functioning of
the battery.
6.2 Accessories
CHECK accessory package with Packing List/Bill of Material to ensure completeness. VERIFY
QUANTITY OF ITEMS WITH THE PACKING LIST. DO NOT proceed with installation until all
accessory parts are available.
Accessories are packed in a separate carton and may include, but are not limited to, the following:
TABLE 6.1
ACCESSORIES
Connector Hardware (in a plastic bag)
• Intercell Connectors • Nuts
• Bolts • Washers
Lifting Straps
Lifting Platfor
m - Height adjustable lifting platform for supporting cells at module level.
Base-beams
Terminal Plate Kits
Terminal Plate Connectors
Cell Number Set
Mounting Har
dwar
e
Miscellaneous: • Brackets • Specialty Items
Rack
NO-OX-ID-Grease
Rack Assembly Instructions
Assembly Drawing
Bill of Materials
Installation Manual
CHECK IF RECEIVED