Outback FM60 User Manual

Operation
900-0009-01-00 Rev D 49
Advanced Menu
The Advanced menu allows fine-tuning of the FLEXmax operations including Snooze periods
and Maximum Power Point limits (see page 97). The following modes are available in
the Advanced menu. They will appear in the following order.
o
Snooze Mode
o
Wakeup
o
MPPT Mode
o
Park Mpp
o
Mpp Range Limit % Voc
o
Absorb Time
o
Rebulk Voltage
o
Vbatt Calibration
o
RTS Compensation
o
Auto Restart
o
Aux Polarity
o
Reset to Defaults?
Figure 35 Accessing the Advanced Menu
Snooze Mode (Advanced Menu)
Snoozing occurs if the charging current does not reach the user-selected cutoff current set point
as shown in this screen.
Figure 36 Snooze Mode
To adjust the set point in the Snooze Mode screen:
1. Navigate to the Snooze Mode screen through the
ADVANCED MENU as instructed in Figure 35.
2. Press <AMP> to adjust the amp setting.
Amp values increments include: 0.2, 0.4, 0.6, 0.8 and 1.0.
3. Press <NEXT> to advance to the Wakeup Mode screen.
To Exit:
o Press <EXIT> once to return to the main menu.
o Press <EXIT> twice to return to the status screen.
ADVANCED MENU
Snooze Mode
< 0.6 amp
EXIT NEXT AMP
Snooz
e
Mod
e
To Access the Advanced Menus:
1. From the main menu, press <> or <> to move the

to the left of Advanced.
2. Press <GO> to open the first Advanced menu screen.
3. Press <NEXT> to cycle through the available modes. The
Snooze Mode screen should be the first screen to display.
4. Press <EXIT> to return to the status screen.
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Main Menu
Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO