Outback FM60 User Manual

Operation
900-0009-01-00 Rev D 57
Logging
The Logging screen in the main menu enables the user to clear the daily and cumulative logs
if necessary. Logs can be downloaded to an SD card if a MATE3 or MATE3s is installed.
See page 71 for details.
The FLEXmax daily log begins when the controller enters Wakeup. See page 26.
IMPORTANT:
If two or more charge controllers are used in the same system and are started up or cleared
on different days, their numeric dates will not be the same. This can lead to some
misunderstandings when looking back and comparing data between the two or more units. A
user looking back at day 12 on both units would find very different results.
Figure 48 Logging Mode
To clear the logs:
1. From the main menu, press <> to move the arrow
next to Logging.
2. Press <GO> to advance to the End-of-the-Day
summary screen.
3. Press the second soft key (SK2) to bring up the CLEAR
Log screen. The CLEAR LOG screen offers the option
of clearing up to 128 days of accumulated statistics or
the total in the secondary STATS screen (page 59).
4. Press and hold either <TOTL> (total) or <DAILY>
to clear those specific statistics. The Are you sure?
screen appears.
5. Pressing <YES> returns to the CLEAR LOG screen;
pressing <NO> returns to the Logging screen.
6. Press <BACK> to return to the End-of-Day
summary screen.
 Charger Aux Light
EQ Misc Advanced
Logging Stats
EXIT   GO
Main Menu
Charger Aux Light
EQ Misc Advanced
 Logging Stats
EXIT   GO
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
CLEAR LOG
BACK TOTL DAILY
Are you Sure?
NO YES
Today 000Ah 00.0kWH
011Vp 00.0Ap 0.00kWp
MAX 14.7 V ABS 01:00
MIN 14.6 V FLT 00:00
End-of-Day
Summar
y
Screen
Pressing SK3 and SK4 changes the displayed
day’s statistics, by moving either forward or
backward within the 128 days of available statistics
that are viewable.