Outback FM60 User Manual

MATE3-Class Screens
900-0009-01-00 Rev D 69
Night Light
Figure 70 Night Light
Float
Figure 71 Float
Diversion: Relay and Solid St
Figure 72 Diversion:Relay and Diversion: Solid St
Low Batt Disconnect
Figure 73 Low Batt Disconnect
Remote
Figure 74 Remote
Restart Mode
This item selects between continuous MPPT, or occasional restarts. (See pages 23 and 55.)
Figure 75 Restart Mode
Set Points:
o 0 – Continuous MPPT, 1 – Automatic re-sweep every 90
minutes in MPPT charging, 2 – Automatic re-sweep every
90 minutes in any mode.
Set Points: None
This mode can also be used for the AGS function. See pages
44 and 68 for important information on this function.
Set Points:
o Disconnect
o Re-Connect
o Disconnect Delay
Set Points (NOTE: All items function identically for both
Diversion: Relay and Diversion: Solid St, except for Active:
High or Low):
o Active: High or Low. (Not present in Diversion: Solid St)
o Relative Voltage
o Hysteresis
o Hold
o Dela
y
Set Points: None
Set Points:
o Active: High or Low.
o Threshold
o Hysteresis Time
o ON Time