Outback FM60 User Manual

MATE-Class Screens
900-0009-01-00 Rev D 77
LOG Screens
Figure 84 LOG Screens
Navigation for STATUS/CC/LOGS
o
<
STATUS
>
returns to the
CC/PG2
screen.
o
<
DOWN
>
moves to the next menu item in
the diagram.
o
<
UP
>
moves to the previous menu item in
the diagram.
o
<
TOP
>
returns to the 1
st
CC/LOG1
screen
for the port shown.
o
<
PORT
>
directs the system display to read
the next device (port) on the HUB.
o
<
DAY
–>
displays log information from one
day earlier. Logs can be displayed from as
far as 128 days in the past.
o
<
DAY
+>
displays log information from one
day later. If the present day is displayed,
then pressing this key will return the log to
128 days in the past.
STATUS/CC/METER----P00
end of cc logs display
TOP STATUS
STATUS----------------
choose device
FX CC DC MAIN
MAIN------------------
1:35:04p
SUM STATUS SETUP ADV
STATUS/CC/PAGE1
MODE METER SETPT PG2
STATUS/CC/PAGE2-------
PG1 LOGS STAT MAIN
STATUS/CC/LOG1-----P00
TODAY 0 AH 00.0 kWH
21Vp 00.0Ap 0.00kWp
DOWN DAY- DAY+ PORT
STATUS/CC/LOG2-----P00
TODAY battery
max 14.5V min 14.4V
DOWN DAY- DAY+ PORT
STATUS/CC/LOG3-----P00
TODAY absorb float
00:00 00:00
DOWN DAY- DAY+ PORT
Charge Controller Logs
The LOG screens contain information collected
from the FLEXmax on individual days. These
logs include daily accumulated amp-hours and
kilowatt-hours, and peak readings for power,
current, and voltage. It also includes the timers
for the FLEXmax battery charger. This data
is the same as that shown on the FLEXmax
End-of-Day Summary screen (see page 20.)
Log 1 Today:
o
AH
(accumulated battery amp-hours)
o
Kwh
(accumulated battery kilowatt-hours)
o
Vp
(peak PV voltage)
o
Ap
(peak PV current)
o
kWp
(peak PV kilowatt-hours)
Log 2 Today:
o
max V
(maximum battery voltage)
o
min V
(minimum battery voltage)
Log 3 Today:
o
absorb
timer
o
float
timer