Outback FM60 User Manual

MATE-Class Screens
900-0009-01-00 Rev D 79
Advanced Menus
The Advanced menus available in the MATE or MATE2 system display allow any of the
following options:
o
Change the settings of the FLEXmax battery charger and temperature compensation
o
Change the parameters of the FLEXmax MPPT process
o
Change the settings of the FLEXmax equalization process
o
Calibrate the FLEXmax meters
o
Change the settings of the
A
UX
output to run small AC or DC loads
o
Start a generator using Advanced Generator Start (AGS) Mode (see page 44)
o
Adjust the settings or functions of other OutBack devices which are connected to the system display
(see appropriate manuals)
The following pages detail the MATE, or MATE2, Control Modes. Please note whenever a
password is called for, the system password is:
141
Accessing the Advanced Menus
Figure 86 Accessing the Advanced Menus
o
Press any soft key to advance to
the next screen.
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
MAIN------------------
1:35:04p
SUM STATUS SETUP ADV
ADV/PASSWORD----------
Enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD----------
Enter the password
141
ENTER INC DEC EXIT
o
Press the
<
INC
>
soft key until
132
becomes
141
.
o
Press
<
ENTER
>
when the number
141
is
displayed. This will proceed into the
ADV choose
device
menu in the Advanced menu map.
o
Press
<
EXIT
>
to return to the Main Menu without
changing the password.