Specifications

• • •
Advanced Photovoltaic Combiner
The OutBack Power Systems FLEXware PV Series Combiner
Box sets the new standard for PV balance-of-system
hardware. Ideal for both small or large systems, the
FLEXware PV8 and FLEXware PV12 accommodates the
overcurrent protection requirements of your application.
From 150VDC breakers for low voltage PV systems, to
600VDC fuse holders for high voltage PV systems, the
FLEXware PV Combiner series handles it all.
Designed to survive in outdoor environments, the
rainproof, UL type 3R powder coated aluminum chassis
can be mounted on a wall, sloped roof or pole. The unique
angled negative terminal bus bar design makes wiring fast
and easy without the common problem of larger output
conductors blocking access to the smaller input terminals.
Dual output lug terminals are included for up to 2/0 AWG
conductors. The tinted flame-retardant polycarbonate
deadfront panel creates a clean appearance while
preventing accidental contact with the live terminals and
is easily removable during installation.
The FLEXware PV Series Combiner Box makes it easy to
take your installation to the next level.
• Combine Multiple Strings from
a Single Array
• Outdoor Rain-Resistant
Aluminum Enclosure
• Optimized Wire Routing For
Easy Installation
• Tinted Flame-Retardant
Polycarbonate Deadfront Panel
• Generous Wiring Conduit
Knockouts
• Wall, Roof or Pole Mountable
• Accommodates dual 2/0 AWG
output wiring
• Accommodates 150VDC DC
Breakers or 600 VDC Fuses
FLEXware PV 12
FLEXware PV 8
www.outbackpower.com