Installation Manual

Planning
900-0160-01-01 Rev B 15
Figure 4 Bypass Switching
Both manual and automatic double-throw bypass switches are commonly available in a range of
sizes and options. These are highly recommended for systems with more than a single inverter.
WARNING: Shock Hazard or Equipment Damage
Using independent bypass devices on multiple inverters can result in power being routed to
inappropriate places. This could create an electric shock hazard or damage the equipment.
Figure 5 Bypass Switching for Multiple Inverters
AC Source
AC Loads
GSLC Bypass
Inoperative
Radian
Inverter
Input Wiring Output Wiring
AC Source AC Loads
Output Wiring
Inactive Radian
Inverters
GSLC Bypass Devices
(not to be used)
External Bypass Device
Input Wiring