MATE2 Specifications

SYSTEM MANAGEMENT REMOTE MONIT

AND CONTROL

The OutBack MATE is a complete system controller and display for both

the OutBack FX2000 inverter/charger and MX60 MPPT PV charge

controller. It provides a display of the operation as well as allows

control and adjustment of the setpoints. The OutBack Mate also

coordinates the operation of the entire system to maximize performance

and to prevent multiple products from conflicting.

A single OutBack MATE is able to connect to multiple FX2000

inverter/charges, MX60 MPPT PV charge controllers and any other

OutBack power conversion and control products offered in the future. A

maximum of ten OutBack products will be able to be connected to a

single MATE via CAT 5 / ethernet type cabling with 8 wire RJ45 modular

connectors and the OutBack HUB communication manager.

The OutBack MATE includes a 4 line backlit LCD display with 80

alphanumeric characters. This allows multiple measurements to be

displayed at the same time and reduces the amount of abbreviations

required, simplifying the operation and reducing confusion. All of the

programmed setpoints are stored in permanent memory to eliminate the

need to reprogram the system after a shutdown or battery replacement.

The OutBack MATE also includes a built in real time clock and calendar which allows programming of the inverter operation based on

the time of day and even day of the week. This can be used to allow the system to work with time-of-day power rates or to limit a

generator's run time to a specific time period of the day or week.

The OutBack MATE also includes an opto-isolated RS232 port with a DB9 jack for connection to the serial port of a PC computer.

OutBack is working with several third party developers to offer Windows based software programs for datalogging and graphical display

of the system’s operation and performance. This PC computer software will be available separately and is expected in September,

2002.

Specifications The MATE

Interface Display 4 line 80 character backlit LCD - Alphanumeric with graphic symbols

Control Keypad 6 backlit silicone membrane keys- dedicated inverter and AC input keys

Status Indicators Two LED Status Indicators : Green = Inverter Yellow = AC Input

Communication Protocol Proprietary OutBack Multi-drop using an OutBack HUB

Interconnection Cabling Standard CAT 5 network cable with RJ45 modular jack - 50 ft included

PC Computer Interface RS232 opto-isolated DB9 jack 9600 baud serial communication

Microprocessor 16 MHz low power consumption version

Setpoint and Data Memory 32K non-volatile flash RAM

Clock / Calendar On-board real time clock with battery backup

Audible Indicator 2 KHz Transducer

Environmental Rating Indoor Type 1 Optional outdoor Type 3R transparent lockable cover

Dimensions 5.75” W x 4.25” H x 2” D 14.6 cm x 10.8 cm x 5.08 cm

Shipping Weight 1 lb - 454 g

Warranty Two years parts and labor Optional Extended Warranty

Preliminary - Specifications subject to change without notice