Outback FX-R Series Operator Manual
Operation
12 900-0167-01-01 Rev B
Status Indicators
Figure 3 Inverter Status LED Indicators
1
2
3
STATUS INVERTER (Green):
Solid
: The FXR inverter is on and providing power.
• If accompanied by a solid yellow
AC I
N
indicator (
2
), the
inverter is also connected to the utility grid with an AC input
mode that uses both inverter power and grid power
(
Support
,
Grid
Tied
, or
GridZero
).
• See page 13 for descriptions of AC input modes.
Flashing: The inverter has been turned on but is idle.
• The inverter is likely in Search mode. See page 24.
Off: The inverter is off. It is not waiting to provide power.
• See the system display manual to turn the inverter on.
• Any power present is from another source such as the utility
grid or generator.
• The inverter may also be a slave that is in Silent mode due to the Power Save function.
If so, the master inverter may still be providing power to the system.
• See the FXR Series Inverter/Charger Installation Manual for a description of Power Save.
AC IN (Yellow):
Solid:
The AC source is connected and providing power.
• The FXR inverter may or may not be charging the batteries, depending on settings.
• May be accompanied by a green
S
TATUS
I
NVERTER
indicator (
1
).
Flashing: The AC source is present but has not been accepted.
• If flashing continues, the FXR inverter is refusing the source. See the Troubleshooting section
on page 47.
Off
: No AC source is detected.
• If a source is supposed to be present, see the Troubleshooting section on page 47.
ERROR (Red):
Solid
: Error. The inverter has shut down due to a critical problem which may be internal
or external.
•
This indicator is accompanied by an error message in the system display.
•
See page 52 for a description of error messages.
Flashing
: Warning. The inverter has detected a non-critical problem but has not yet
shut down.
•
A warning does not always lead to a shutdown — if it does, it becomes an error.
•
This indicator is accompanied by a warning message in the system display.
•
See page 53 for a description of warning messages.
Off
: No problems are detected.