Replacement Part List

Part No 501505 9 F041513A
BC2600 Hydro Series Brush Cutter Owner’s Manual
2. Pull Forward or Reverse Drive lever up to engage transaxle in desired direction.
Reverse Drive Lever (left hand) Forward Drive Lever (right hand)
SHUT DOWN
1. Release drive lever to disengage transaxle.
2. Release blade clutch handle to disengage blade.
3. (Non-Electric) Move the throttle to the slowest possible position on the throttle control.
4. (Electric models) Turn the key to the OFF position.
CLEARING A CLOGGED CUTTING DECK
1. Shut engine off and wait for blade to stop completely.
2. Disconnect spark plug wire.
3. Remove clog from cutting deck.
WEAR durable gloves. Clog may contain sharp materials.
4. Reconnect spark plug wire.
DISCONNECT spark plug wire before servicing unit.










