Instructions / Assembly

Post Feet may be attached before (Fig. 2) or after
(Fig. 3)
attaching
Panel Frame Kits and Panels to Posts. See Kit instructions.
1.
Position Post base plate over center of Post Feet
and align screw holes. Check that Post is level.
2.
Insert included Post Feet Hex Bolts and tighten
securely, but do not overtighten
(Figs. 2 & 3).
IMPORTANT: Installed screens should be moved by 2 or
more people to avoid damage to Panels and Panel Frames.
INSTALLATION INSTRUCTIONS
CONFIGURATION EXAMPLES
Illustrations not to scale. Black posts and channels rendered in gray.
For use with OUTDECO's Post & Frame System and
Decorative Panels or Slat Fencing.
•
Post Feet holes (Fig. 1) align with base plates of OUTDECO 75"
or 52" Surface-Mount Posts for quick and easy installation.
•
Galvanized steel with black powder-coating
•
Post Feet can be attached to Posts before or after installing
Decorative Panels or Slats.
•
CAUTION: If screens are placed outdoors in windy conditions,
temporarily secure Post Feet to surface.
RELATED OUTDECO
PRODUCTS
Post & Frame System
•
Surface-Mount Post:
75" (Figs. 5-9, 11 & 12) & 52" (Fig. 10)
•
Panel Frame Kit: 24"x48",
48"x70", 36"x72"; Attaches to
posts, holds Panels – Wood
(Figs. 7-8) , WPC
*
(Figs. 9 & 10) ,
Poly
(Fig. 11)
•
Slat Fence Kit:
24", 72"; Attaches to posts,
holds WPC
*
Fence Slats (Fig. 12)
*
Wood-Poly Composite
Slat
Fencing
Post Feet
for Freestanding Screens
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN: We recommend following best building practices for installing OUTDECO
Post Feet with OUTDECO Steel Posts in accordance with their intended purpose. Examples shown in this document are installation suggestions. If
in doubt, consult a professional. All components of the OUTDECO Post & Frame System have a 5-Year Limited Warranty for material integrity when
installed per these instructions. Installers assume responsibility for the installation. (See full warranty at outdecousa.com/post-frame.)
Post Feet Features Installing Post Feet
on OUTDECO 75" or 52" Surface-mount Posts
36" x 72" 36" x 72" 36" x 72" 36" x 72" 24"x 48"
24" x 48"
48" x 70" 72" h
Accessory for
OUTDECO Post
& Frame System
WHAT'S IN THE BOX
#
ITEM
2 Post Feet – Black powder-coated galvanized steel
8
Post Feet Hex Bolts – 
Movable panel screens and slat fencing enhance décor or partition private spaces – indoors or outdoors.
Fig. 2 Fig. 3
Securing Post Feet
in Outdoor Windy Conditions
1.
To secure screens, temporarily attach to surface.
2.
Pre-drill the surface and screw through the ¼"ø holes
at each end of the Post Feet (Fig. 4) .
Use minimum 3" screws with washers
(not included).
3.
Add sand bags
if necessary.
IMPORTANT:
Locating screens outdoors
in intense winds is not recommended.
Fig. 4
Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12




 
¼"ø

Fig. 1
Screw holes for securing
Post Feet to surface (Fig. 4) .
(See right.)
Screw holes for attaching
Post base.
(Figs. 2 & 3) .
(See top right.)
Decorative Privacy Panels
Metal Panels
36"x72"
Wood & WPC* Panels
24"x48", 36"x72", 48"x70"
Poly Panels
24"x48", 36"x72"
WPC* Slats
24" or 72" 
Mounts with Slat
Fence Kit
Mounts directly to Posts Mounts with Panel Frame Kit
Suitable for pro builders and DIY crafters. Installation requires 2 people.
outdecousa.com
Metal & Wood Panels, WPC Slats,
Posts, Frame & Slat Kits
modinexpanels.com
WPC Panels,
Posts, Frame Kits
design-vu.com
Poly Panels,
Posts, Frame Kits
See all OUTDECO USA
products and nd more
info on our websites.