Installation Guide

ODFSPH10_2018
2
Installaon Instrucons
Free-Standing Harmony Pergola
(16 x 10, 16 x 12, 16 x 14, 16 x 16, 16 x 18, 16 x 20)
English
Tools or Supplies - Required
Item Quanty Descripon
A. 4 Stainless Steel Wing Bracket
B. 4 Stainless Steel Cover Plate
C. 48 2.5” Stainless Steel Philips Screw
D. 16 1/4” - 1” Stainless Steel Hex Bolt
E. 4 1/4” - 2” Stainless Steel Hex Bolt
F. 2 Adhesive
G. 4 Notched Beam
H. 11 Cross Beam
I. 4 Harmony Square Column
J. 4 Tuscan Cap
K. 4 Decorave Neck
L. 4 Tuscan Base
M. 8 Column Spacer
Parts Included with this Product
Congratulaons on your purchase of the Free-Standing Harmony Pergola. Before you begin, please refer to the parts list
to ensure all materials needed for assembly have been received.
Quesons? Contact your local Outdoor Disncons Dealer or visit www.outdoordisncons.com
Outdoor Disncons representaves are available M-F 8:00 a.m. to 5:00 p.m. EST. at 844.345.2424.
A. & B.
E.
F.
C.
D.
Tape Measure & Chalk Line Wrench or Socket Set
Level, String Level & Square Screw Bits
Caulk Gun Drill Bit: 3/16
Pencil Sand Paper
Power Drill & Saw Shovel / Post Hole Digger
4 x 4 Wooden Post Qty.4 80 lb. Ready Mix Concrete Qty.8
Water Hammer
Ladder Tape
H.
G.
I. J.
K.
L.
M.
Tools or Supplies - Oponal
12” Sonatube Qty. 4 Galvanized Metal 4 x 4 Support
Fasteners with required
mounng hardware (Pier Mount)
Wheel Barrow Bucket
Masonry Drill Bits Hammer Drill
Stainless Steel Nails 16D 3 1/2” 2x4 Pressure Treated Wood
Qty.1