Manualshelf

Installation Guide

ManualsBrandsOutdoor Essentials ManualsGarden Center3 ft. x 3 ft. Western Red Cedar Raised Garden Bed Kit
12
3X3 AND 3X6 RAISED GARDEN BED KIT
INSTALLATION INSTRUCTIONS
3x3 Kit 3x6 Kit
Parts included
(4) Preassembled side assemblies
(12) T-25 screws*
*8 screws are needed to assemble the raised bed. You will end
up with 4 extra screws.
Parts included
(2) Preassembled 72" side assemblies
(2) Preassembled 36" side assemblies
(12) T-25 screws
Tools required
Cordless drill with Star bit
Tools required
Cordless drill with Star bit
©2020 UFP Retail Solutions, LLC. Outdoor Essentials is a registered trademark of UFP Industries, Inc.
All rights reserved. 2801 E. Beltline NE, Grand Rapids, MI 49525 10978_5/20
OutdoorEssentialProducts.com
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION
OR USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH
THE CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE
PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES
NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
Place two sides together to make a corner
(metal plates facing inward).
Drive screws through the corner as shown to attach sides.
Place two sides together to make a corner
(metal plates facing inward).
Drive screws through the corner as shown to attach sides.
Repeat with remaining sides to complete the bed. Repeat with remaining sides to complete the bed.
*
1
2
1
2
3x3RaisedGard.ai
3x6RaisedGard.ai

Summary of content (2 pages)