FAQ

Frequently Asked Questions
Q: What are the dimensions of our
fence panels?
A: 6' tall x 8' wide, 42" tall x 8' wide,
48" tall x 8' wide.
Q: What is the width of our fence gates?
A: Varies depending on the style of the fence
panel.
Q: How many backer rails are
recommended per 6' tall fence section?
A: Three.
Q: What dimension lumber is
recommended to be used as fence
posts?
A: 4x4, 6x6 or a combination of both.
Q: How far in the ground should you
place your 4x4 posts?
A: 18" to 24" (check with building codes in
your local areas).
Q: Where should the backer rails be
placed on the posts when building
a fence?
A: 6" down from the top, 6" up from the
ground, with the intermediate one centered
between the two.
Q: How do you calculate the number of
panels you will need to complete a job?
A: Determine the number of linear feet for the
entire job and divide that number by 8 for
the number of panels.
Q: How do you determine the number
of posts needed to complete a job?
A: Take the number of panels needed and
add 1.
Q: When should I paint or stain my fence?
A: When the wood is dry to the touch.
Q: Is it okay to use landscape timbers as
fence posts?
A: No.
Q: Do you need a permit to erect a fence?
A: Sometimes. Check with local authorities.
Important note: Always ask about an
homeowner association or code
restrictions, before making a purchase
decision. This will ensure that the product
purchased meets any specific require-
ments their community may have.
7471_10/13
WOOD FENCING