Installation Guide

COMPOSITE RANCH RAIL FENCE – INSTALLATION INSTRUCTIONS
Pg. 2
STEP 2 PREDRILL HOLES IN POSTS
1. Align the included template with the top of the post.
Fold edges around and tape to the post.
STEP 1 PREDRILL HOLES IN RAILS
1. Place the closed bracket on the end of each rail. 2. Using a 1/8" drill bit, predrill through the two holes on the
bottom of the L-bracket. Do this on both sides of the rail.
Then remove brackets until later.
We recommend predrilling all of your rails before assembling
any fence sections
2. Using a 1/8" drill bit, predrill the holes where indicated for
the ranch rail style you choose (2-rail, 3-rail, or 4-rail).
Remove the template. We recommend predrilling all posts
before assembly.