Installation Guide

ManualsBrandsOutdoor Essentials ManualsComposite Fence Rails5 ft. x 6 ft. Composite 2-Rail Ranch Rail Fence Panel Kit

OutdoorEssentialProducts.com

THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION

OR USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH

THE CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE

PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES

NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.

COMPOSITE RANCH RAIL FENCE – INSTALLATION INSTRUCTIONS

STEP 5B ASSEMBLE THE FENCE SECTION

STEP 6 FINISH THE FENCE SECTION

1. Slide one rail onto the bottom L-brackets. 2. Attach the bottom rail to the brackets using the short screws

provided.

3. Slide the bracket caps on the remaining rails and

slide onto the L-brackets. Attach the rails to the

brackets using the short screws.

1. Set the second post. Wait until the post is set

and continue the remaining sections, setting

the posts after the assembly is complete.

2. Attach one post cap to each post using

PVC cement.

Pg. 4