User Manual

5
3. Gas Connections
 Reach inside the base and attach gas supply line to the
input shown below, using a 3/8” flare fitting. Use two
wrenches to ensure a gas tight connection.
 Ensure the correct orifices are installed for the fuel type
you are using (see Crystal Fire Burner Owner’s manual
included with burner for orifice sizing information).
TIGHTEN ALL CONNECTIONS SECURELY WITH TWO WRENCHES
 Attach flex line from the burner to gas valve as shown
below. Use two wrenches to secure connection.
Gas Supply
TIGHTEN CONNECTION
SECURELY WITH WRENCH
Flexline to Burner
TIGHTEN CONNECTION
SECURELY WITH WRENCH