Kenwood Benches Manual

42487 REV A 11.08.17

Kenwood Collection Benches

Installation Instructions For:

KW-LB & KW-SB

SAVE THESE INSTRUCTIONS

When using the furnishing, basic precautions should always be followed, including the following:

 Read all instructions before using benches

 Use the furnishing only for its intended use as described in these instructions.

Included in Packaging

Top (1X)

(Top for KW-LB pictured)

Legs (4X)

Hex Wrench (1X)

KW-LB

KW-SB

Touch-Up Paint Bottle (1X)

PAGE 1
Kenwood Collection Benches Installation Instructions For: KW-LB & KW-SB KW-LB KW-SB SAVE THESE INSTRUCTIONS When using the furnishing, basic precautions should always be followed, including the following:   Read all instructions before using benches Use the furnishing only for its intended use as described in these instructions. Included in Packaging Top (1X) Legs (4X) (Top for KW-LB pictured) Touch-Up Paint Bottle (1X) 42487 REV A 11.08.
PAGE 2
Assembly Instructions NOTE: Before assembly, check for damage. Do not use damaged components. 1. Unpack all the contents from the box and remove the individual packaging from each component. 2. Carefully lay the Top, with underside facing upwards, on a soft and flat surface. 3. Slide the legs over tightening mechanism located in each corner of bench top. Using provided hex wrench, tighten the screws to secure legs to bench top. Do a final tightening of all screws to fully secure legs. 4.