included. operation + Read, understand, and fallow these instructions for installation and DO NOT DISCARD THIS factual * important operating and maintenance Instructions GAS-FIRED & us LISTED if yow smell gas: + Shutoff gas to the appliance * Extinguishable flame, + odor continues, keep away from the appliance and Immediately call your gas supplier or five department, WARNING Distortions or use gasoline, or other + fl inflammable vapors and Highlands, in the vicinity of this or any other appliance.
Read this manual before installing or operating this appliance, Please retain this owner's manual for future reference, Congratulations Congratulations or selecting snDutfoorGreatRopm Company decorative gas appliance, The Crystal Fire™ burner you have selected is designed to provide the utmost in safety, reliability, and efficiency. As the owner ofa Crystal Fire™, you'll want to feat and carefully follow ail of the instructions maintained this owner's manual, Pay special attention to.
Table of Contents 1. sitting and Code Approvals a. Appliance certification b. BTU specifications 2. Getting Started 5. Gas Hookup and Information a Fuel b. Gas pressure ¢. Gas connection a. Design and installation considerations o. oversupply b. Tools and supplies required 6, Lighting and Operation ¢. Inspect the appliance and components 7. Finishing 3. Framing and Clearances a. Clearances to Combustibles 8. Troubleshooting 9. Service and Maintenance b, Framing and Enclosure for LP Gas Supply 10.
This appliance is a Decorative Gas Appliance for OUTDOOR USE ONLY and MUST NOT he used for cooking, Place the Crystal Fire on flatland stable surface in an outdoor location such as a patio or deck, This location. must be adjacent to the gas supply line or LP gas supply cylinder, DONOR locate the appliance where twill extensively wet or submerged in water, A.
WARNING A + flotations reflect typical installations and are EGR DESIGN PURPOSES ONLY, Fire Risk * Distentions/ diagrams are not drawn to Provide nonappearance: scale. = Actual installation may vary. dus to individual design preference. » Around alr oppression ® Arsenic access, Locate appliance away from traffic areas A.
. Framing Enclosure for LP Gas Supply System 1 your build an-enclosure Fran LP gas cylinder, follow these recommended specifications and local codes: Ventilation Enclosures must be ventilated by openings at the level of the cylinder valve and stifle level. Effectiveness must be determined with the cylinder(s) in place.
A. Burner Assembly All Models « Check for damage. Donor use damaged components, » The hose assembly must be replaced prior to the gp pliancy being put interpenetration i there is evidence of excessive abrasion or wear, or if the hose is damaged, The replacement hose assertively specified by the manufacturer, « The'burnermustbereplaced prior to the appliance being put Into operation FH is evident that the burners damaged.
C. Ignite Installation and Grounding Note: Before installing ignition system, ensure that gas valves-are closed and gos oa pir is disconnected for safety. / Brand Rider Pan [Chastiser thin surface) SRO AAR Bauer Porker Hew: Mut ~~ SHOE Cop Spark Grange wire used ONLY for optional Automatic ignition kit Spark 1. A pounding wire is incledediwithiyourburner as shown above, This scarce plugged inheritor port on tieback side of the sparer. 2.
A. Fuel B. Before making gas connections, ensure the appliance being Ir stalled is compatible with the derivative pas type. Gas Pressure Proper input pressures sre required for optimum performance, Gas line sing encouragements dean to be made following NE PASS p> WARNING A Fire Fisk Explosion Risk Mystify inlet pressures. # High preparedness cause firepower condition. o Low precise may SUSE explosion.
DLP Bas Supply » The pressing regulator and hose assembly supplied with LP mocker mist be used. Pleistocene pressure regulators amid hose assemblies must be those specified in this manual, The [EF gas supply cylinder used with LP models must be constructed and marked dn accordance with the specifications for LP gas cylinders of the US. Department of Transpiration LOT Cylinders must be stored outdoors inventiveness ares out of the reach of children.
Gas Setup for Natural Gas 1 With beginner place in Outdoor Greatcoat Company fire pit table or other installation location and propulsive orifice inserted in burner neck {sea chart orp. d'or natural gas orifice sizing), adjust aly shutters closed position {as shown at right, ao light visible through the shutter] by loosening the small resew on the air shuttled rotating it 10 2 closed potion pod res tightening screw. 2.
BE rorvoursasery, reap roarer Lot EEE A. This appliance cane Tit electronically or with-match: When fighting, follow these instructions exactly. 8B. Before lighting smell runaround the appliance.areadfor gas. Be sure to smallness tithe base of the-appliance because some gas Is heavier thankful and will settle ow the floor, WHAT TOO IF YOU SMELL GAS: s Do not try to light any appliance. eo not touch any electrostatics, do not use any phone nearby. » immediately call your gas supplier from a neighbors phone.
\ WARNING A FIRE RISK ~ HIGH TEMPERATURES Neap combustible household rems away noncompliance. + Dn NOT obstruct combustion and ventilation air. s Do NOT place combustible items onto of or near appliance. # Keep furniture, draperies away from appliance. ® Do NOT use, lantern fuel, kerosene, charcoal lighter field, or similar liquids in this appliance.
Although the frequency of appliance servicing and maintenance will 4h WARNING depend rouse-and the types of Installation, a qualified services technician should perform an appliance checked spousal Animal inspection by qualified technician redeployment. Storage of an appliance binders is permissible only lighthearted is ~ Check: disconnected sad redivide from the appliance.
