Instructions / Assembly

ManualsBrandsOutdoor Living Today ManualsGazebos12 ft. Bayside Cedar Octagon Gazebo with Screen Kit

Screen Kit For

Octagon Gazebo

Assembly Manual

Revision #12

Oct 18th/2016

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 1

Thank you for purchasing

a Screen Kit for our Octagon Gazebo.

Please take the time

to identify all the parts prior

to assembly.

Safety Point

s and Other Considerations

Our products are built for use based on proper installation and normal residential use, on level ground. Please

follow the instruction manual when building your Gazebo and retain the manual for future maintenance

purposes.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the

snow off the roof(s).

-if the product is elevated, any structural and building code requirements are solely the customer's

responsibility, and should be abided by.

-in high or gusty wind conditions it is advisable to keep the structure securely grounded.

-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free

of any liability for improper installation, maintenance and repair.

In the event of a missing or broken piece, simply call the Outdoor Living Today

Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your

purchase. It is our commitment to you to courier replacement parts, free of charge,

within 10 business days of this notification. Replacement parts will not be

provided free of charge after the 30 day grace period.

Please Note:

During the off season and any

severe storm warnings during the

regular season, we strongly

recommend Customers remove the

Screen Panels and Screen Door to

avoid any unnecessary damage to

your kit.

Summary of content (11 pages)

PAGE 1
Screen Kit For Octagon Gazebo Assembly Manual Revision #12 Oct 18th/2016 Thank you for purchasing a Screen Kit for our Octagon Gazebo. Please take the time to identify all the parts prior to assembly. Please Note: During the off season and any severe storm warnings during the regular season, we strongly recommend Customers remove the Screen Panels and Screen Door to avoid any unnecessary damage to your kit.
PAGE 2
Thank you for purchasing a Screen Kit for our Octagon Gazebo Please take the time to identify all the parts prior to assembly.
PAGE 3
1. Lay out Floor Landcaping Fabric around your gazebo. You will need to cut 4 Strips 150” long for a 12ft Gazebo and 3 strips at 126” long for a 10ft Gazebo. 12ft Model 2. Loosely place the Strips inside the gazebo cutting with a utility knife to fit around posts. For Panelized Gazebo Kits, leave some slack in the fabric to accommodate Cedar Decking Panels. Secure Fabric to joists with 6-8 - 3/4” screws leaving enough slack to accomodate the decking pieces. 3.
PAGE 4
. Continue to lay Cedar Deck Panels down on joists following Part D of Panelized Gazebo Assembly Instructions. 5. Continue adding Cedar Decking around the gazebo. Nail or Staple Fabric down to top edge of Rim Joist. When all outside perimeter pieces are installed, score the outside excess fabric. See illustration below. Tip: Do not discard all, you may want to use some excess to screen Cupola Side Rails. (see Cupola Section of both Precut and Panelized Gazebo Manuals.
PAGE 5
6. Locate a Lower Screen and Horizontal Mid “T” Moulding. See Step 7 for Details of “T” Molding. Center Lower Screen on posts and position the Horizontal “T” Molding on top of screen framing. “T” Moulding should sit evenly on Handrail. Important: Do not start at Doorway. See Step 13 for instructions. 7. Attach “T” Moulding to Handrail with 3 - 3” screws into pre-drilled holes. 8. Locate an Upper Screen (Higher than Lower Screen) and place inside “T” Moulding slot. 9.
PAGE 6
11. Attach Vertical “T” Moulding to Post where screens come together. Vertical “T” Moulding will hold screens in place. Attach “T” Moulding with 3 - 2” screws, (top, middle, bottom). Bottom Floor Cleat 12. Attach Bottom Floor Cleat to Cedar Decking and tight against screen framing. Use 3 - 1 1/4” screws to secure. Pilot hole Cleat to avoid splitting of wood. Complete all remaining sides now except doorway. Important - Remove Corner Brackets if installed in Doorway area.
PAGE 7
Helpful Hint: May be required to adjust rafter/post Carriage Bolt connection to accomodate proper fit of Narrow Wall. 14. Align flush with bottom of Upper Railing and tight against inside of Post as shown in Step 13. Attach with 8 - 3” screws to secure. For 12’ Octagon, install 2nd Narrow Wall to opposite side. 15. 12’ Octagon For 12’ Octagon, install 2nd Narrow Wall to opposite side. For 10ft Octagon, only 1 Narrow Wall is required.
PAGE 8
17. Over the Doorway, place Upper Doorway Screen on Upper Rail. Place 2 - “L” Moulding (top and bottom) and secure with 6 - 3” screws. 1” Black Screws 18. Complete remaining Vertical “T” Moulding attachments. 19. Locate 3 Black Door Hinges and Black Screws. Attach Hinges to Screen Door evenly. Be sure to drill pilot holes to avoid splitting of Screen Door. With Hinges attached, carefully lift door into place. Toll Free 1-888-658-1658 www.outdoorlivingtoday.com Page 8 sales@outdoorlivingtoday.
PAGE 9
2” screws 20. At the bottom, shim Screen Door so it is evenly spaced around the door. When correctly aligned, secure Hinges to Narrow Wall framing with Black 2” screws. Be sure to Pilot Hole all holes first. 21. From the inside, attach Top and Bottom Screen Door Thresholds with 4 - 1 1/4” screws per piece. Vertical Door Stop 22. Attach both Vertical Door Stops between Top and Bottom Door Thresholds. Use 4 - 1 1/4” screws to secure per piece. Toll Free 1-888-658-1658 www.outdoorlivingtoday.
PAGE 10
23. From the outside, attach Screen Door Pull Handle and Barrel Bolt. Use Black Hardware included in each kit. Important - Drill shallow pilot holes with 1/8” drill bit prior to securing with screws to prevent wood splitting. 24. Locate the Octagon Cupola Screen Cap. From the inside, place on Skybox framing evenly and secure with 4 - 3” screws. Do not over-tighten screws. Cupola Screen Cap will need to be cleaned out as required.
PAGE 11
We hope your experience assembling the Bayside Gazebo Screen Kit has been both positive and rewarding. We value your feedback and would like to hear back from you on how well we are doing in the following areas: 1. Customer Service 2. On Time Shipping The materials contained in this Assembly Manual may be 3. Motor Freight Delivery downloaded or copied provided that ALL copies retain the 4. Quality of Materials copyright and any other proprietary notices contained on the 5. Assembly Manual materials.