Installation Guide

9. With Stub Joists positioned correctly on
Joist, attach each Stub Joist with 2 - 2 1/2”
screws. Stub Joists should be flush with top
and bottom of Joist with all notches facing
down. There are two Joist / Stub Joist
Assembly’s, complete both now.
2 - 2 1/2”
screws
Completed
Joist / Stub
Joist
connections.
10. Carefully lift up completed Joist / Stub Joist
Assembly and fit notches onto Girder.
Joist (D)
4” long
screws
11. Attach all Stub
Joists and Joist to
Girder with 1 - 4”
screw per piece.
Complete both
Assembly’s
Note: Drill pilot holes
in Joists and Stub
Joists to make it
easier to screw in 4”
screws.
1 - 4” screw
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 7