Installation Guide

12. On a flat surface, position Ladder Blocking (F)
where marked on top edge of Joist (D) and screw
with 2 - 2 1/2” screws per end. Ladder Blocking
should be flush with top and bottom of Joist with all
notches facing down.
F
D
D
Joist is pre-marked for
blocking placement.
2 - 2 1/2”
screws per
Blocking end.
13. Complete all four Ladder Sections
on the ground prior to moving to Step 14.
Completed Ladder Section
14. Carefully lift up one of the
Ladder Sections between
Girders. You will require a
helper to assist in
lifting Ladder Sections.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 8