Instructions / Assembly

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 7
5. Before feeding Part B - 133” long Aluminum Wings (5)
with Canopy into track, make sure canopy fabric is facing
the correct direction. First, locate Lead and Anchor Wings in
set. Both have a black pull rope attached. Make sure rope
knots are facing to the inside and the pull rope is facing to
the outside. Starting with the Lead Wing, feed the wing
wheels onto the track as shown above. Wheels have
springs and compress in and out slightly to fit. Feed wings in
the track that is open on the end (gap side) first.
Lead Wing
Pull Rope on Lead Wing
Rope Knot
on inside
Anchor Rope on
last wing facing out
Lead Wing
Lead Wing
2nd Wing
2nd Wing
6. Push Lead Wing slightly ahead on track. Wings can roll out of track until Part D - 4 1/4” long
Aluminum Wing Stops are installed so be careful. Lift and feed 2nd Wing into track and push wing
slightly forward.
Gap side
2nd Wing
Important- Ensure rope knots are on the top side of
the canopy, facing the center of the pergola so that
pull rope is accessible.
You will need 2 Ladders and a helper to feed the
wings into track.