Installation Guide

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [e-mail]
Page 5
3. With Step ladders and
another helper, lift up the
Drive Beam and center on
Girder. Be sure to decide
first what end you want to
designate as the stationary
end of the Drive Beam. ie.
The Canopy will always
gather on this end and
may block your view.
Girder
Decide what end
you want the
stationary part of the
canopy to be on
before securing.
4. Position Drive Beam
so it is even with the top
of the Girder as
illustrated to the right.
Drive Beam should be
evenly spaced between
Pergola Posts (66 1/2”).
before attaching.
Secure with 4 - 1 1/2”
screws per end.